• 440 Stainless steel cutter and plate hardened to Rockwell C55-60.
• Discharge Size - 2-1/2" flanged horizontal adaptable to 3" flange, 2" NPT optional.
• Seals - dual mechanical carbon/rotary ceramic/stationary, buna-n elastomers.
• Seal leak probes and lead wires.
• Moisture detection system.
• Construction - Cast Iron ASTM A-48, Class 30, 30,000# tensile strength, protected with a corrosion resistant baked on epoxy power coating.
• Balanced concentric pump housing and impeller.
• Attaching Hardware - 304 stainless steel.
• "O" Ring Seals - Buna-N.
• Impeller - Bronze vortex design.
• Optional:
  • Trimmed Impeller.
  • Silicon Carbide Seal(s).
  • 50 ft. power & sensor cables.
  • Automatic Reversing (3-phase only).
  • High Flow.
  • Non-sparking Rail Systems.
  • 2" NPT vertical discharge (HH and HF units only)

MOTOR:

• FM and cCSAus rated Class 1, Division 1, Group C & D construction.
• 1 Phase - 230 Volt (3 & 5 HP only).
• 3 Phase - 200/230/460/575 Volt, 3450 RPM.
• Stator - Class F insulation and lead wires. Nema B design.
• Thermal sensor with leads.
• Finned cast iron housing for faster heat dissipation.
• Housing - Cast Iron, oil filled.
• Ball Bearings - Upper and lower high carbon chromium steel.
• Power and sensor cable length - 25 ft.

APPLICATIONS:
• Sewage lift stations
• Housing developments
• Low pressure sewer systems
• High vertical lift or long force mains.

WARNING: Not for use in acidic atmospheres.