Model 72/76 Sump/Dewatering  
Submersible Pumps 

• 115V single phase/60 cycle, 3400 RPM
• Model 72 - .3 HP, 3.1 Amps
• Model 76 - 1/2 HP, 5.0 Amps
• Thermal overload protection.
• Non-corrosive engineered plastic motor housing, pump housing and base.
• No steel sheet metal parts to rust or corrode.
• All stainless steel screws, switch arm, and lower motor housing.
• Oil-free.
• 2-pole float operated mechanical switch.
• Solid buoyant polypropylene float.
• Engineered plastic impeller.
• UL listed 9’ cord with 3-prong plug.
• Maximum temperature for dewatering - 110°F. (43°C.)
• Passes 3/8" inch solids (sphere).
• 1-1/2" NPT discharge.
• Non-clogging vortex impeller.
• Model 72 - On point— 7-3/8"  • Off point— 3-5/8"
• Model 72 - major width - 9-1/16"  • Height - 11-13/16"
• Model 76 - On point—8-1/2"  • Off point— 3-5/8"
• Model 76 - major width - 9-1/16"  • Height - 12-5/8"

  
Tested to UL 778 and CSA 22.2 108 Standards

View the Catalog Sheet for the Model 72 Pumps, View the Catalog Sheet for the Model 76 Pumps.
View the Installation Instructions for the 72/76 Series Pumps.
View the Parts List for the 72/76 Series Pumps (Requires Adobe Acrobat Reader 3.0 or Higher.)

The FREE Adobe Acrobat Reader is necessary to view the interactive PDF documents posted on this site. To download, please click on the "Get Acrobat Reader" button.