Pedestal Pumps
DEWATERING AND SUMP PUMPS

• Automatic.
• 115 Volt / 1 Phase / 1725 RPM.
• Non-clogging impeller design.
• 7-1/2" foot UL listed 3-wire cord & plug.
• Model 81 - 1-1/4" discharge.
• Models 82 & 84 - 1-1/2" discharge.
• Adjustable 12" cycle, factory set at 9".
• Permanently lubricated motor with overload protection.
• Non corrosive shaft.
• Temperature Rating: 130° F. - 54° C.

AVAILABLE MODELS

• 81 Series - .3 HP - features high impact PVC column &
  thermoplastic pump housing and base.
• 82 Series - 1/3 HP - features high impact PVC column &
  cast iron pump housing and base.
• 84 Series - 1/2 HP - features high impact PVC column &
  cast iron pump housing and base.

NOTE: These units are designed for indoor applications where the motor is mounted above the pit cover and protected from water.

Tested to UL 778 and
CSA 22.2 108 Standards

View the Catalog Sheet for the 80 Series Pumps.
View the installation instructions for the 80 Series Pumps.
 (Requires Adobe Acrobat Reader 3.0 or Higher.)

The FREE Adobe Acrobat Reader is necessary to view the interactive PDF documents posted on this site. To download, please click on the "Get Acrobat Reader" button.