Zoeller Corp.

Company Profile

Service Stations

Comments

What's New

Products

Home Page Related Links Contact Info Extended Warranty Order Info Technical Briefs
Pump Sizing Program Literature Index Technical Support


Product Index | Utility/Dewatering & Effluent Pumps | Sewage/Waste Pumps | Grinder Pumps | Agricultural Pumps | Hi-Temp Pumps | Pedestal Pumps | Package Systems & Basins | Hazardous Environment Pumps | Home Improvement Products | Specialty Products | Water Conditioning Products | Backup Systems | Controls & Accessories | On-Site Septic | Literature Info

Container Assembly
P/N 5090-0001
Installing the Zoeller Filter in Existing Onsite Systems.
     There are two ways to retrofit a Zoeller filter in existing septic systems, dosing systems, or aerobic on-site wastewater systems. The first method is to retrofit a Zoeller effluent filter to the existing septic tank outlet pipe. This usually requires the outlet end of the septic tank to be dug up exposing the access cover. Then insert a Zoeller WW filter 170-0078 in the outlet tee (SDR 35 or SCH 40) or replace the baffle with a tee and install the new filter. In many existing septic tanks it is very labor intensive or impossible to do because of the location or design of the existing tank. Also working in the environment of a septic tank is not very pleasant.
     The alternative to installing the Zoeller Filter in the existing tank is to install it outside the tank between the tank outlet and the distribution system in the Zoeller Container Assembly. The installation is quick and simple and provides the same protection to the distribution system (lateral fields, STEP systems, mound systems, trickle systems, etc.) that is provided by installing the filter in the septic tank. The container assembly comes complete including the Filter Container, a 12" tall Riser, Riser Lid, Lid Screws, SDR 35 and Schedule 40 pipe seals and foam gasket.

Useful for reducing laundry lint when utilized in a separate drainfield and installed with a "WW" Filter (P/N 170-0078).

Part Number

Description Weight
5090-0001 Container Assembly w/12" riser & lid 32 lbs.
31-1473 12" riser extension w/hardware and gasket 10 lbs.
31-1476 6" riser extension w/hardware and gasket 5 lbs.


View the Catalog Sheet/Installation for the Container Assembly. (Requires Adobe Acrobat Reader 3.0 or Higher.)

The FREE Adobe Acrobat Reader is necessary to view the interactive PDF documents posted on this site. To download, please click on the "Get Acrobat Reader" button.

GET ACROBAT READER ButtAutoCad.gif (1398 bytes)  Click here to download available AutoCad sketches for these products.


Quality Pumps Since 1939 techdata.gif - 0.0 K
Top of Page | Zoeller Corporate Home Page | Zoeller Pump Co. Home Page | Company Profile
What's New at Zoeller
| Zoeller Pump Co. Products | Tech Briefs | Contact Info
| Extended Warranty
Comments
| Related Links | Service Station Listings | Technical Support | Order Info | Literature Index
| Pump Sizing Program | 2006 Recall Info 

Web pages created and maintained by Zoeller Company
© 2008 Zoeller Company. All rights reserved.
Send information regarding this web site to webmasteratsymbolmoving.gif (2294 bytes)zoeller.com