Standard Features:

• 2 HP, 60 Cycle, 200V-230V, 1 PH, 3450 RPM.
• 1-1/4" NPT Vertical discharge.
• Carbon/Ceramic Seal.
• Thermal Overload protection.
• Balanced Bronze Impeller.
• Stainless Steel Cutter Plate/Cutter.
• Stainless Steel Shaft.
• Stainless Steel Hardware.
• Brass test plugs.
• 20' Power Cord.

Options:

• Extra Length Cords (Consult Factory).

Tested to UL778 Standards

• (1) Grinder (Auto or Nonauto) See Model 820 Grinder.
• (1) Alarm System (Optional)
• (1) Variable Level Float Switch Assembly (not required for auto pumps)
• (1) Weight Only (2 required if alarm is used)
• (1) Junction Box
• (1) Basin, Cover and Hardware
• (1) Pull Rod
• (1) Stainless Steel Lifting Cable

For Field Mount Systems add to Outdoor Requirements:

• (1) Rail System (Optional)
• (1) Angle arm Bracket (required for basins over 72" deep)

Field Mount System does not come with Basin, cover and hardware.
Remove plug(s). Hardwire pump, float switch, and power supply inside junction box.

• (1) Grinder (Automatic or NonAuto) See Model 820 Grinder.
• (1) Alarm System (Optional)
• (1) Weight Only (2 required if alarm is used)
• (1) Junction Box (Optional)
• (1) Basin, Cover and Hardware

NOTE: Contact factory for control panel selection.
NOTE: Access doors available on field mount systems. Consult Factory.
Special basin configurations - Consult Factory.

View the Catalog Sheet for the 820 Series Pumps, or the Catalog Sheet for the 820 Prepackage System, or the Catalog Sheet for the Cold Climate 820 Prepackage System, or the Catalog Sheet for the 820 Replacement Grinder.
View the Installation Instructions for the 820 Series Pumps or the Owner's Manual .
View the Parts List for Model 820. (Requires Adobe Acrobat Reader 3.0 or Higher.)

The FREE Adobe Acrobat Reader is necessary to view the interactive PDF documents posted on this site. To download, please click on the "Get Acrobat Reader" button.

   Click here to download available AutoCad sketches for these products.