Zoeller Corp.

Company Profile

Service Stations

Comments

What's New

Products

Home Page Related Links Contact Info Extended Warranty Order Info Technical Briefs
Pump Sizing Program Literature Index Technical Support


Product Index | Utility/Dewatering & Effluent Pumps | Sewage/Waste Pumps | Grinder Pumps | Agricultural Pumps | Hi-Temp Pumps | Pedestal Pumps | Package Systems & Basins | Hazardous Environment Pumps | Home Improvement Products | Specialty Products | Potable Water Products | Backup Systems | Controls & Accessories | OnSite Septic | Literature Info

Electrical Control Panel
For Simplex Installations
An Electrical Control Panel is used on a Simplex pump application where automatic electrical cycling of the pump is desired for added protection in residential or commercial applications. A Control Panel is required for all systems using a nonautomatic pump. The built-in alarm system, a standard feature, can be connected to sound when the water level becomes unusually high. All electrical systems must be installed by a qualified electrician and according to the National Electrical Code. (See Section 430-71 though 430-113, plus any others that apply.)


Tested to UL Standard UL 508


Single Phase Control Panel Features:
  • 115-208-230 Volt.
  • Clear dead front panel.
  • Complete with (3) 20 ft. control float switches.
  • Equipment disconnect.
  • Motor contactor (all models except 10-1019 and 10-1023)
  • NEMA 4X enclosure with lockable latch.
  • Top mounted alarm light.
  • Alarm horn provides audio warning of alarm condition *83 to 85 decibel rating.
  • Pump run indicator light.
  • Horn silence and test toggle switches.
  • HOA switch.
  • Complete installation instructions included.
  • U.L. listed for US & Canada.
  • Lockable Latch.
  • 2 Year Warranty.
  • Dry auxiliary contact (not available in plug-in panels).
sk1172c.gif (488 bytes)Tested to UL Standard UL 508
10-0125.jpg (5068 bytes)
Simplex Control Panel
Model 10-0125

Single Phase Simplex Plug-in Control Panel:
  • 115 model 10-1029 or 230 Volt model 10-1023.
  • NEMA 4X enclosure with hinged cover.
  • Receptacle for use with piggyback pump switch.
  • Alarm Horn (83 to 85 decibel rating).
  • Terminal strip.
  • Horn silence switch to turn alarm on or off.
  • Alarm Float only.

Note: 600 and 700 Series single phase pumps require special panels that include start components. See FM1228 for correct panel selection.

10-1019.jpg (4333 bytes)
Simplex Plug-In Panel - 
Model 10-1019

Three Phase Simplex Control Panel Features:
  • 208-230-400-575 Volt/Three Phase.
  • Nema 4X - watertight enclosure with lockable latch.
  • Hand-off-toggle switch.
  • Green pump run light.
  • Alarm test & silence switches.
  • Red alarm beacon and audible alarm for a high water condition (83 to 85 decibel rating.
  • Motor protection switch with overload protection.
  • Magnetic starter.
  • Numbered terminal strip for connecting pumps and variable level float switches.
  • Dry auxiliary contacts for remote alarm devices.
  • Three or float float operation (floats not included - See FM0526).
  • UL Listed.
  • The use of off-the-shelf components provide for relatively easy field maintenance and repair.
  • 2 Year Warranty.
10-0125c.jpg (4389 bytes)
Three Phase - Dead Front Cover

View the Catalog Sheet for Simplex Electrical Control Panels.
View the Recommended Applications for Simplex Electrical Control Panels (Requires Adobe Acrobat Reader 3.0 or Higher.)

The FREE Adobe Acrobat Reader is necessary to view the interactive PDF documents posted on this site. To download, please click on the "Get Acrobat Reader" button.

GET ACROBAT READER


Quality Pumps Since 1939 techdata.gif - 0.0 K