Zoeller Corp.

Company Profile

Service Stations

Comments

What's New

Products

Home Page Related Links Contact Info Extended Warranty Order Info Technical Briefs
Pump Sizing Program Literature Index Technical Support


Product Index | Utility/Dewatering & Effluent Pumps | Sewage/Waste Pumps | Grinder Pumps | Agricultural Pumps | Hi-Temp Pumps | Pedestal Pumps | Package Systems & Basins | Hazardous Environment Pumps | Home Improvement Products | Specialty Products | Potable Water Products | Backup Systems | Controls & Accessories | OnSite Septic | Literature Info

Control Panels for Explosion Proof Pumps
Simplex and Duplex with intrinsically safe relays

   These Intrinsically safe control panels are used on pump applications defined as a hazardous duty location. Lift stations in some regions fall under this classification. The intrinsically safe panel, in conjunction with an explosion proof pump, will provide a system that will not allow ignition of the explosive gases. The purpose of the control panel is to cycle a pump automatically. Each panel comes standard with pump run light(s), a high water audible and visual alarm, seal fail indicator(s), and a UL listing. All panels come standard with a NEMA 4x rating for indoor or outdoor use.
    These panels MUST NOT be in the space classified as needing explosion proof equipment. Special fittings that either prevent the passage of hot gases, in the case of an explosion in a Class I area or the passage of combustible dust, fibers, or flyings in a Class II or III area (NEC 501-5 and 502-5), are required. A qualified electrician must install all electrical systems. National Electric Code (NEC) Articles 500 through 503 explain in detail the requirements for the installation of wiring or electrical equipment in hazardous locations. These articles along with other applicable regulations, local governing inspection authorities, insurance representatives, and qualified engineering / technical assistance should be your guides to the installation of wiring or electrical equipment in any hazardous or potentially hazardous location.

Control Panel Features:

  • Intrinsically safe relays.
  • Nema 4X enclosure.
  • Top mounted alarm light.
  • Hand-Off-Auto Toggle Switch for each pump.
  • Alarm horn with silence switch.
  • Magnetic motor contactor.
  • Lockable Latch.
  • Auxiliary Dry Contact/High Water Alarm.
  • Circuit breaker pump disconnect.
  • 3 or 4 variable float switch control operation.
  • The use of off-the-shelf components provide for relatively easy field maintenance and repair.
  • Green pump run pilot light for each pump.
  • Seal fail indicator light(s).
  • Thermal cutouts for 3 Phase.
  • Duplex only - Lead/Lag alternating circuit.
  • For additional information refer to Simplex or Duplex Electrical Control Panel or consult the factory representative.
10-0546xproofopen.jpg (3634 bytes)
Simplex Intrinsically Safe Panel

10-0485xproofopen.jpg (4078 bytes)
Duplex Intrinsically Safe Panel

ul.JPG (5631 bytes)
2 Year Warranty

 

Standard Enclosure
Dimensions

Panel Phase Dimensions
H x W x D
Simplex 1 16 x 14 x 6
Duplex 1 16 x 14 x 6
Simplex 3 16 x 14 x 6
Duplex 3 16 x 14 x 6

View the Catalog Sheet  for the Explosion Proof Control Panels and the Recommended Simplex/Duplex Panels for Pumps with Explosion Proof Motors. (Requires Adobe Acrobat Reader 3.0 or Higher.)

The FREE Adobe Acrobat Reader is necessary to view the interactive PDF documents posted on this site. To download, please click on the "Get Acrobat Reader" button.

GET ACROBAT READER


Quality Pumps Since 1939