Disconnect & Rail System by Zoeller Pump Company

Zoeller Corp.

Company Profile

Service Stations

Comments

Disconnect & Rail Systems

Disconnect Only - Disconnect Fitting; used for shallow systems where guide rails are not necessary. (pull rod not included)

Economical, reduces time & cost of removing pump.

Safety, keeps personnel out of pits & out of contact with contaminates.

Inspections made fast & easy.

SPECIFICATIONS
Part Number	39-0053	39-0001	39-0002	39-0003	39-0004
Pump Discharge	1-1/4" N.P.T.	1-1/2" N.P.T.	2" N.P.T.	1-1/2" N.P.T.	2" N.P.T.
Disconnect Material	Brass	Brass	Brass	Brass	Brass
Disconnect Weight	1.6 lbs.	2.0 lbs.	2.5 lbs.	10.1 lbs.	12 lbs.
Centerline of rails from Wall-in 30" Basin (min.)	------------	------------	------------	2.75"	2.75"
Travel to disengage	3-3/4"	3"	3-1/2"	3-3/8"	3-7/8"
Pressure Rating	150 PSI	150 PSI	150 PSI	150 PSI	150 PSI
Pull Rods Thread Size	3/8" - 16 UNC	3/8" - 16 UNC	3/8" - 16 UNC	3/8" - 16 UNC	3/8" - 16 UNC
Support Weight	All pumps should be supported underneath with concrete blocks or basin floor.
Guide Rail Size & Material	-------------			3/4" IPS Pipe (S.S./Gal.) recommended or PVC Scd. 80 optional Supplied by customer.

Complete Systems - Rail & Disconnect system for effluent or sewage pumps for removal and reinstallation of pumps without getting in or removing fluid from the pit. (2 stand-offs included)

39-0003, 1-1/2" NPT

39-0004, 2" NPT

Pipe rails, pull rods & intermediate brackets not included.

View the Catalog Sheet for the Disconnect Rail System.
View the Installation Procedures for the Disconnect Rail System.
View the Installation Procedures for the Square Guide Rail System.
View the Installation Procedures for the 840 Grinder Rail System. (Requires Adobe Acrobat Reader 3.0 or Higher.)

The FREE Adobe Acrobat Reader is necessary to view the interactive PDF documents posted on this site. To download, please click on the "Get Acrobat Reader" button.