Tru-Flow - an effluent splitter system for On Site Wastewater by Zoeller Co.

Splitter System
This innovative splitter system will evenly split effluent into two to five lines. It is made of two major parts: (1) the diverter basin & cover and (2) the actual diverter. The basin & cover may settle as much as 15° front-to back (30° total) and/or 12° side-to-side (24° total) and the splitter will evenly split effluent, when adjusted. This will solve the problems of distribution boxes settling. The splitter system works with low flows as well as high flows. This unique design has no parts that wear out and is made of corrosion resistance material. The splitter system is maintainable from the surface.

COMPARE THESE FEATURES:

Will evenly split effluent into two to five lines.
Tested from 1/10 gpm to 30 gpm flows.
Can be used to accurately split effluent in pumped applications such as enhanced flow or flood dose systems (5 openings = 30 gpm max., 4 openings = 21 gpm max., 3 openings = 17 gpm max., 2 openings = 13 gpm max.)
Sturdy polypropylene box to withstand frost heaves, heavy loads, and corrosion.
Lightweight for quick and easy installations.
Bubble level included for quick and easy installation and service.
Tru-Flow Splitter System is maintainable and adjustable from surface after installation.
Corrosion resistant materials.
Settling can occur and the splitter will adjust to evenly split effluent.
4" riser easily attached to visually inspect and adjust the diverter.
Can be used as a 4 to 1 or 3 to 2 recirculating splitter valve for recirculating media filters.
6 SDR 35 pipe seals included.

We recommend using a Zoeller Company septic tank filter in conjunction with the splitter system on every septic system.

dbox.jpg (1735 bytes)

Patent Nos. 6,112,766
and 6,152,650

dboxsketch.gif (2674 bytes)

NOTE: If utilizing 3" pipe, order seal P/N 173-0005. If utilizing a 4" schedule 40 pipe, order seal P/N 173-0006.

P/N 173-0007 - Zoeller 6" diameter x 36" tall riser for splitter system. Used on deep installations to aid in diverter adjustment. Height is field adjustable.