• Finned Class 30 Cast Iron Construction.
• Corrosion resistant powder coated epoxy finish.
• Legs provide for free standing installation.
• 60 Hz, 3450 RPM.
• 20 ft. cord length.
• 1-1/4" NPT Vertical Discharge.
• Oil-Filled - Hermetically Sealed Motor with Class F Windings.
• Hardened Stainless Steel Cutter and Disc, Rockwell C55-60.
• Cutters Protected from Abrasive Solids.
• Bronze Vortex Impeller.
• Upper and Lower Ball Bearing Construction.
• Stainless Steel Screws, Bolts and Lifting Bail.
• Easily adapts to many existing competitors rail systems.
• Dual mechanical seals with leak detection.
• Automatic Thermal Overload Protection (single phase).
• Thermal Sensor Protection (standard on 3 phase).
• Preassembled systems available.
• cCSAus certified.
• 135 lbs.

AVAILABLE MODELS

• 842 - 2 HP, 1 Phase, 200 or 230 Volt.
• 842 - 2 HP, 3 Phase, 200, 230, 460 or 575 Volt.
  
• 841 - 3 HP, 1 Phase, 200 or 230 Volt.
• 841 - 3 HP, 3 Phase, 200, 230, 460 or 575 Volt.

Tested to UL Standard UL778 & Certified to CSA Standard C22.2 No. 108

View the Catalog Sheet for the 842/841 Series Pump.
View the Owners Manual for the 840/842/841 Series Pumps.
View the Parts List for Model 841. (Requires Adobe Acrobat Reader 3.0 or Higher.)

The FREE Adobe Acrobat Reader is necessary to view the interactive PDF documents posted on this site. To download, please click on the "Get Acrobat Reader" button.

     Click here to download available AutoCad sketches for these products.