- FM and cCSAus rated.
- Non-clogging semi-open ductile iron
impeller.
- Class 30 cast iron construction.
- All units are double seal for extra motor
protection.
- Corrosion resistant powder coated epoxy
finish.
- Stainless steel screws, washers, tags and
seal assembly.
- 25 ft. UL listed power and sensor cord.
Cord length also available in 50 ft.
- Single phase - 230 Volt capacitor start,
capacitor run.
- Three phase - 200-230-460-575 Volt.
- Explosion proof motor - 60 Hz, 1750 RPM,
oil-filled, hermetically sealed with heavy duty finned motor housing for
added heat dissipation.
- Thermal sensor.
- Continuous duty operation in submerged
conditions.
- Maximum temperature for sewage or
dewatering 104°F (40°C) with 1.2 service factor (1.0 service factor on
Model X661).
- 416 stainless steel motor shaft.
- Tandem shaft seals - stainless steel
fitted, carbon/ceramic seal faces.
- Seal leak probes.
- Oversized upper & lower ball bearings
running in an oil bath.
- Buna-n square rings and seals used
throughout.
- All models pass 2-1/2" spherical
solids.
- Specify 3" NPT vertical, 3"
horizontal flanged or 4" horizontal flanged discharge.
- 100% computerized testing.
- Major width 17-9/16". Height
33-1/4".
- Non-sparking rail systems available for
all models.
- Intrinsically safe control panels
available.
| AVAILABLE MODELS |
• Nonautomatic
(For intrinsically safe variable level control systems).
• Double seal only.
• 3" Vertical, 3" Horizontal or 4" Horizontal
flanged discharge.
• 230V/1 Phase or 200/230/460/575V/3 Phase. |
X611 - 1.0 BHP
X621 - 1.5 BHP
X631 - 2.0 BHP
X641 - 3.0 BHP
X651 - 5.0 BHP
X661 - 7.5 BHP |
|
|
Standard 3600 & 3615
Certified to CSA Standard C22.2 No. 145
WARNING: Not for use in acidic
atmospheres.
Patent No. 6,364,620
  
|
zoeller.com
