X292 - X293
X294 - X295

• FM listed motor for Class 1, Division 1, Group C & D environments.
• Non-clogging vortex impeller design bronze class 88-8-0-4.
• Stainless steel rotor shaft.
• Durable cast construction. Cast iron cover, motor adapter and pump housing. No sheet metal parts to rust or corrode. All cast iron class 30, 30000# tensile strength.
• Stainless steel screws and handle.
• Brass test plugs.
• 20 foot UL listed 5-wire (1 PH) or 8-wire (3 PH) neoprene cord. Extra cords lengths available in 25’-35’-50’ length only. Sensor leads & power leads in one cord for easy installation.
• 1-1/4" Threaded conduit connection for protecting cords in those extra heavy duty applications.
• Moisture sensors prewired in motor housing (requires indicator in panel).
• Zoeller custom designed panels with intrinsically safe relays and moisture indicator are required.
• 3 phase models available.
• Motor - 60 cycle, 3450 RPM, oil-filled, hermetically sealed, automatic reset thermal overload protected  (3 phase requires circuit in control panel).
• Maximum temperature for sewage or dewatering 104° F (40° C). If over 104° F, consult factory.
• Shaft Seal - Stainless steel wetted parts, carbon & ceramic rotary face seal.
• Upper ball bearing and lower ball bearing running in bath of oil.
• Buna-n square ring seals.
• All models pass 2" solids (sphere).
• Major width 13 5/16". Height 22".
• Available in nonautomatic units only.
• When ordering specify 2" or 3" NPT female flanged vertical discharge.
• 100% computerized testing and 100% tested submerged in water.
• Corrosion resistant powder coated epoxy finish.
• Models X292, 1/2 HP - Models X293, 1 HP - Models X294, 1½ HP - Models X295, 2 HP.

Note: The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles.

Standard 3600 & 3615

WARNING: Not for use in acidic, methanol, or ethyl acetate atmospheres.

View the Catalog Sheet for the X290 Series Pumps.
View the Installation Instructions for the X280 Series Pumps or the Explosion Proof Wiring Diagram for the Explosion Proof Pumps or the Owner's Manual. (Requires Adobe Acrobat Reader 3.0 or Higher.)

The FREE Adobe Acrobat Reader is necessary to view the interactive PDF documents posted on this site. To download, please click on the "Get Acrobat Reader" button.