• FM listed motor for Class 1, Division 1, Group C & D environments.
• Non-clogging vortex impeller design bronze class 88-8-0-4.
• Stainless steel rotor shaft.
• Durable cast construction. Cast iron cover, motor adapter and pump housing. No sheet metal parts to rust or corrode. All cast iron class 30, 30000# tensile strength.
• Stainless steel screws and handle.
• Brass test plugs.
• 20 foot UL listed 5-wire (1 PH) or 8-wire (3 PH) neoprene cord. Extra cords lengths available in 25’-35’-50’ length only. Sensor leads & power leads in one cord for easy installation.
• Threaded conduit connection for protecting cords in those extra heavy duty applications.
• Moisture sensors prewired in motor housing (requires indicator in panel).
• Zoeller custom designed panels with intrinsically safe relays and moisture indicator are required.
• 3 phase models available.
• Motor - 60 cycle, 3450 RPM, oil-filled, hermetically sealed, automatic reset thermal overload protected  (3 PH requires circuit in control panel).
• Maximum temperature for effluent or dewatering 104° F (40° C). 
• Shaft Seal - Stainless steel wetted parts, carbon & ceramic rotary face seal.
• Upper ball bearing and lower ball bearing running in bath of oil.
• Buna-n square ring seals.
• All models pass ¾" solids (sphere).
• Major width 13 5/16". Height 23".
• Available in nonautomatic units only.
• 1½" NPT discharge standard, 2" & 3" NPT Flange available.
• 100% computerized testing and 100% tested submerged in water.
• Corrosion resistant powder coated epoxy finish.
• X161 and X163 Models, 1/2 HP - X165 Models, 1 HP
• X185 Models, 1 HP - X186 and X188 Models, 1-1/2 HP - X185 and X191 Models, 2 HP

Note: The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles.

WARNING: Not for use in acidic, methanol, or ethyl acetate atmospheres.

Standard 3600 & 3615

View the Catalog Sheet for the X160 Series Pump or the Catalog Sheet for the X180/X191 Series Pump.
View the Installation Instructions for the X160, X180 and X191 Series Pump or the Owner's Manual . 
View the Explosion Proof Wiring Diagram for the Explosion Proof Pumps.  (Requires Adobe Acrobat Reader 3.0 or Higher.)

The FREE Adobe Acrobat Reader is necessary to view the interactive PDF documents posted on this site. To download, please click on the "Get Acrobat Reader" button.