Button bar Spinning logo
Zoeller Engineered Products
Product Index | Commercial Effluent | Commercial Sewage | Heavy Duty Solids Handling
| X-Proof Motor Environment | Grinders
| Accessories | Literature Info

Heavy Duty Solids-Handling Pumps
Submersible Pumps - 1 HP thru 100 HP
61HD Series 1 - 7-1/2 BHP 60 Cycle 1750 RPM 2-1/2" solids
62HD Series 5 - 20 BHP 60 Cycle 1750 RPM 3" solids
6680 Series 25 - 60 BHP 60 Cycle 1750 RPM 4" solids
69HD Series 20 - 100 BHP 60 Cycle 1725 RPM 3" solids
  • Extended service life with the cool run design standard and concentric pump housing on most models.
  • Pump motor housing, volute, and impeller - ASTM A-48 Class 30 cast iron. All hardware stainless steel.
  • 60 cycle - 1725 RPM oil-filled and hermetically sealed motors.
  • Carbon/Ceramic tandem mechanical seals protect the motor.
  • Silicon and Tungsten upgrades available.
  • Extra thick cast iron construction with a concentric pump housing design.
  • Rugged lifting lugs integral to the cast housing.
  • Moisture probes and temperature sensor with lead wires are standard on 6680, 62 HD and 69 HD Series Models and optional on 61 HD Series Models. Single phase starting components are shipped loose or in optional enclosure.
  • All models have a Class F insulation system with a maximum internal operating temperature of 294° F.
  • All pumps pass 3" solids. Standard on Models 6680, 62 HD and 69 HD Series. Optional on 61 HD Series 4" discharge units.
  • Two vane Semi-Open impellers with pump-out vanes, enclosed impeller with pump-out vanes, and vortex impellers with top pump-out vanes are available on selected models.
  • 25’ standard Type SO 4 conductor cords. Assembly engineered for water tightness.
  • Corrosion resistant powder coated epoxy (except 69HD series).
  • Extended warranties.
  • Fast deliveries. (contact Factory for 69HD series)
  • Prompt engineered application assistance.
             

004439.gif (5726 bytes)

mark-2csm.GIF (3777 bytes)

                    


Flanged Discharge
61 HD & 62 HD Series

Sketch of Flanged Discharge 6-8 in
Flanged Discharge
6680 Series
6" - 25-60 BHP


Flanged Discharge
69 HD Series
4" - 20-100 BHP
6" - 25-100 BHP

AVAILABLE OPTIONS:
  • Vortex Impeller 
    (1 BHP thru 15 BHP).
  • Extra length cords.
  • Trimmed impellers.
  • Silicon carbide or tungsten carbide seals.
  • Certified Performance Tests.
  • Bronze Impellers.
  • High Temperature units (175°).
  • Dry pit configurations. 
    (1-15 BHP)
  • 5-10 HP 3450 RPM high head units.
  • High Head Models.
  • Inverter Duty Motors.
  • Explosion Proof Motors.

              

ACCESSORIES:
  • Rail Systems cast iron/stainless steel fitted for standard installations.
  • UL listed simplex and duplex control panels with NEMA 4X enclosures. Seal failure detection systems and high temperature motor shut off protection are available for Explosion Proof Series.
  • Fiberglass basins, steel or aluminum access covers with hatches, and accessories for fiberglass and concrete basins.
  • Cast iron check valves 3" NPT, 4", 6", or 8" Flange.
  • Cast iron plug valves.
  • Dry pit base elbow.
  • Stainless steel and galvanized steel lifting cables.
  • Rail systems adaptation kits for using Zoeller pumps on competitors' rail systems.

 

buttonLITon.jpg (1210 bytes)

Click here to view index of forms available for download and viewing in Acrobat Reader.

ButtAutoCad.gif (1398 bytes)

Click here to download available AutoCad sketches for these products.
Performance DataElectrical DataDimensional Data
space.gif - 60 Bytes
QUALITY PUMPS SINCE 1939

Top of Page | Zoeller Corporate Home Page | Zoeller Engineered Products Home Page | Zep Co. Profile |
What's New at Zep
| Zep Comments | Zep Contact Info | Zep Technical Support | Zep Service Stations
| Technical Briefs
| Zep Order Info | Zep Products | Zep Introduction to Pumps |

 

Web pages created and maintained by Zoeller Company
© 2008 Zoeller Company. All rights reserved.
Send information regarding this web site to webmaster@zoeller.com