Engineering & Tech Data
PERFORMANCE DATA - MODEL 61 HD Series
3" & 4" Horizontal Discharge / 2½" Spherical Solid Passing Capacity
1750 RPM

SEMI-OPEN IMPELLER

a00500.gif (39919 bytes)

    STANDARD IMPELLER

  • 6120 - 1.0 BHP - 4.88"
    •
  • 6121 - 1.5 BHP - 5.38"
  • 6122 - 2.0 BHP - 5.75"
  • 6123 - 3.0 BHP - 6.38"
  • 6124 - 5.0 BHP - 7.00"
  • 6125 - 7.5 BHP - 7.50"
 CAUTION: Motor overloading can occur if an oversized impeller is used in an application without enough head. Always verify the actual TDH of an application before using a nonstandard impeller size. Single phase pumps are not sold with oversized impellers.
Performance DataDimensional Data Electrical Data Back to product page
QUALITY PUMPS SINCE 1939

Top of Page | Zoeller Corporate Home Page | Zoeller Engineered Products Home Page | Zep Co. Profile |
What's New at Zep | Zep Comments | Zep Contact Info | Zep Technical Support | Zep Service Stations
| Technical Briefs | Zep Order Info | Zep Products | Zep Introduction to Pumps |

 
Web pages created and maintained by Zoeller Company
© 2008 Zoeller Company. All rights reserved.
Send information regarding this web site to webmaster@zoeller.com