6100 Series -
Commercial Effluent Submersible Pumps |
 |
- Motor - 1/2 H.P. thru 2 HP, 60 Cycles, 3450 RPM, 1PH or 3PH, Oil-filled, hermetically
sealed, automatic reset thermal overload protected (1 PH).
- 3/4" solids passing.
- Dual Shaft Seals - carbon/ceramic
- Class B stator insulation.
- Stainless steel motor shaft.
- Bearings - lower ball & upper sleeve.
- Non-clogging bronze vortex impeller design.
- Durable cast construction. Cast iron switch case, base, motor and pump housing with a
corrosion resistant baked on epoxy powder coating.
- 25' UL listed 3-wire neoprene cord and plug.
- Maximum temperature for effluent or dewatering,
130° F. - 54° C.
- No screens to clog.
- Stainless steel screws, bolts and handle.
- 1-1/2" NPT, discharge with 2" or 3" flange available.
- 100% computer tested.
|
Tested to UL
Standard UL 778
|
